
CT6
Optical/Contact Hand Tachometers with LED display
The Concorde CT6 series of Hand Held Tachometers are available in a variety of models to suit most applications, with large Bright LED displays and a wide selection of excellent features, including standard optical system range up to 3ft (1M) or with a Laser system with a range up to 6ft (2m) for enhanced optical performance. These Tachometers have facilities for both Optical and Contact measurements.
CT6/LSR/ERP is supplied with the LN1 short speed adaptor and has the facility for the end user to be able to adjust the optical sensitivity. This is useful when measuring high speeds using the LN1 short range adaptor where the target may be a mark rather that retro-reflective tape.

CT6/LSR/ERP is supplied with the LN1 short speed adaptor and has the facility for the end user to be able to adjust the optical sensitivity. This is useful when measuring high speeds using the LN1 short range adaptor where the target may be a mark rather that retro-reflective tape.
- Includes Certificate of calibration
- Last reading hold & recall memory
- Long Optical Range
- Range of contact adapters for rpm & linear rate
- Additional Count & Times modes
- External input for remote optical sensors is standard
- Very wide speed range
- Wide range of accessories
Measuring Range | 3 to 99,999 rpm |
Resolution | max - 0.001 (auto) |
Optical Range | CT6: 2 - 36" (.05 - 1m) CT6/LSR: 2 - 72" (.05 - 2m) |
Count Mode Resolution | 0.1 metre or 1rpm |
Time accumulative | 0.01 - 99999 secs |
Time Interval | 0.01 - 99999 (seconds/rev.) |
Accuracy | ±0.01% ±1 digit |
On Target Indicator | Yes |
Low battery Indicator | Yes |
Power | 4 AAA Batteries (included) |
Contact Measurement mode With LSAB-2 Adaptor attached | |
---|---|
RPM | 3 - 50,000 rpm |
Meters / Min | 0.30 - 1999.9 |
Feet/Min | 0.30 - 4500.0 |
Length | 0-999.9 meters (resolution 0.1 meters) |
Total Rev. | 0-9999 revolutions |